News

Toyota Recalls 62,000 Tundras Because a Bad Camshaft Could Snap While Driving

Toyota is recalling about 62,000 non-hybrid 2022-2023 and 2025-2026 Tundras because a bad camshaft could snap while driving. Here's what owners should do.

Gray 2027 Toyota Tundra Trailhunter driving down a dirt trail lined with green brush
The 2027 Toyota Tundra Trailhunter, a new SR5-based off-road package. Photo: Toyota

Toyota is recalling about 62,000 non-hybrid Tundra pickups in the US, covering certain 2022, 2023, 2025 and 2026 models, because an incorrectly manufactured engine camshaft could snap while driving. Toyota says that can cause a loss of motive power at higher speeds and raise the risk of a crash. Dealers will inspect the camshaft and replace it for free if it may be from the affected lot, and owners will be notified by mid-January 2027.

Toyota announced the recall on November 13, 2026. Toyota estimates about 300 bad camshafts could have gone into those 62,000 trucks, so most trucks should only need an inspection, not a new part. The photo above shows a 2027 Tundra, not one of the recalled trucks.

Last updated: November 16, 2026.

Sources

Recall at a glance

ItemDetailSource
AnnouncedNovember 13, 2026Toyota USA
TrucksAbout 62,000 Tundra pickups in the USToyota USA
Model yearsCertain 2022, 2023, 2025 and 2026Toyota USA
Not includedTundra hybrids. The 2024 model year is not on Toyota’s list.Toyota USA
PartEngine camshaft that was manufactured incorrectlyToyota USA
Bad partsAbout 300 camshafts from one production lot at one supplierToyota USA
RiskCamshaft could snap while driving, causing a loss of motive power at higher speeds and a higher crash riskToyota USA
FixDealer inspects the camshaft and replaces it free if it may be from the affected lotToyota USA
Owner lettersBy mid-January 2027Toyota USA
NHTSA campaign numberNot posted as of November 16, 2026NHTSA

What went wrong

Toyota says some Tundras could have an engine camshaft that was manufactured incorrectly and could snap while the truck is being driven. If that happens, the truck can lose motive power at higher speeds, which raises the chance of a crash.

The bad camshafts came from one production lot at one supplier. Toyota estimates about 300 of them could have ended up in the recalled trucks. Toyota’s announcement does not say whether any have broken. The Drive, citing a dealer notice, reports that the affected camshafts are all on cylinder bank one.

The Drive notes that the earlier Tundra engine recalls were for manufacturing debris on a main bearing, a separate problem from this one.

Which trucks are included

Toyota lists certain non-hybrid Tundras from the 2022, 2023, 2025 and 2026 model years. Hybrid Tundras are not included, and the 2024 model year is not on the list. The Drive reports the recall also leaves out the Sequoia.

One report offers a reason for the 2024 gap. Toyota Report, citing a dealer notice posted to an owners’ forum, says the 2022 and 2023 trucks in the recall are ones that later received a replacement engine that may have come with one of the bad camshafts. Toyota’s own announcement does not say this, so check your VIN rather than going by model year alone.

Where the NHTSA filing stands

As of November 16, 2026, NHTSA’s recall records did not show a campaign number for this recall. We checked the 2022 through 2026 Tundra and Tundra Hybrid listings and found no camshaft recall and no Tundra recall filed in October or November 2026. Toyota says owners can still look up their truck by VIN or license plate at Toyota.com/recall or nhtsa.gov/recalls. We will add the campaign number when it posts.

Japan had a smaller recall first

On November 12, Toyota filed recall notice 5903 in Japan for four Tundras sold there as parallel imports and built in January 2026. That notice blamed a right-side exhaust camshaft that may have cracked during machining and could later break and stall the engine. Toyota Report describes those four as American-built trucks. Toyota’s US announcement does not mention the Japan recall.

TruckDaily take

Who should care. If you own a non-hybrid 2022, 2023, 2025 or 2026 Tundra, or are shopping for a used one from those years, check whether that truck is on the list. A camshaft that lets go at highway speed is a real safety problem, even if only about 300 parts are bad.

Who can ignore it. Tundra hybrid owners, and owners of 2024 Tundras, are not on Toyota’s list for this recall. If you are pricing a new truck, our look at the 2027 Tundra’s starting price and new towing tech covers what changed for 2027.

What to do. Run your VIN at nhtsa.gov/recalls or toyota.com/recall now, and again once the campaign posts. Watch for Toyota’s letter by mid-January 2027, then book the inspection. Toyota’s customer line is the Toyota Brand Engagement Center at 1-800-331-4331. If your truck is also part of the older engine recall, check where it stands in the Tundra engine recall phases.

FAQ

How many Tundras are in the camshaft recall?

About 62,000 in the US, according to Toyota. Toyota estimates about 300 bad camshafts could have gone into those trucks.

Which Tundra model years are recalled?

Certain non-hybrid 2022, 2023, 2025 and 2026 Tundras. Hybrid Tundras are not included, and the 2024 model year is not on Toyota’s list.

What happens if the camshaft breaks?

Toyota says the camshaft could snap while driving, which can cause a loss of motive power at higher speeds and increase the risk of a crash.

What is the fix and what does it cost?

A Toyota dealer inspects the camshaft. If it may be from the affected lot, the dealer replaces it at no cost to you.

When will owners be notified?

Toyota says owners will be notified by mid-January 2027.

Is there an NHTSA campaign number yet?

Not as of November 16, 2026. You can still check your VIN at nhtsa.gov/recalls or toyota.com/recall.

Last updated November 18, 2026. Author: TruckDaily.