01 · Bed cargo slide
DECKED CargoGlide DCG1500-6348
1,500 lb payload on this SKU. 75 percent extension. Family line goes up to 2,200 lb on other models. Four D-ring tie-downs. Not a drawer system. Part DCG1500-6348.
Buying guide
DECKED CargoGlide: Best Truck Cargo Slide
Disclosure: This page contains Amazon affiliate links. As an Amazon Associate, TruckDaily earns from qualifying purchases. If you buy through those links, TruckDaily may earn a commission at no extra cost to you.
5 min read
Who this is for / skip
For you if: you load tools, coolers, or gear past the axle and you are done climbing into the bed. You will match the CargoGlide size to the bed before you order.
Skip this page if: you want pull-out drawers under a deck (that is the DECKED drawer system), a rail-mounted toolbox, or a flip-out bed extender. Skip a GMC CarbonPro bed. Skip a bed with a fifth-wheel, a gooseneck, or a bed-mounted spare sticking up. Skip the 600 lb CargoGlide page if you meant this 1,500 lb SKU.
01 · Bed cargo slide
How it works
CargoGlide sits in the bed. You pull the handle. Roller bearings slide the tray toward the tailgate. Push it back and the load rides locked for the road. Extension on this family is 75 percent or 100 percent, depending on the model. This SKU is the 75 percent, 1,500 lb row.
Build on the product page: powder-coated U.S. steel frame, 3/4-inch marine-type plywood deck, thermoplastic top sheet, extruded aluminum sidewalls, cast aluminum handle, polymer corner guards. Low profile for clearance under tonneaus, caps, and side boxes when the chart says it fits. Install is drill into the bed for a bed-mounted unit (four to eight holes, depending on bed length). A CargoGlide on a DECKED Drawer System is a different fitment page and needs the universal bracket kit. 100 percent extension or higher-payload models cannot sit on a Drawer System. Legacy Drawer System is not compatible.
1,500 lb 75 percent bed slide
For a sliding tray that brings the load to the tailgate. Not drawers. Not a toolbox. Not a bed extender.
- Part DCG1500-6348: payload 1,500 lb, extension 75 percent on DECKED’s technical-specs page
- System about 63.4 × 48.7 × 5.2 in. Tray about 59.3 × 45.3 × 3.9 in. Product weight 128 lb. Four D-ring tie-downs
- Family line goes up to 2,200 lb and 100 percent on other models — those are different SKUs, not this 1,500 lb / 75 percent row
- Shop DECKED CargoGlide on this page: ASIN B0F9ZVZMVC
Drawback: this SKU is 1,500 lb and 75 percent, not the family’s 2,200 lb or 100 percent rows. Match bed length. A GMC CarbonPro bed, a fifth-wheel, a gooseneck, or a bed-mounted spare is a skip. Install drills the bed.
Spec table
This SKU is 1,500 lb and 75 percent. The family’s up to 2,200 lb line is for heavier models. No prices on this page.
| DECKED CargoGlide DCG1500-6348 | CargoGlide family (product page) | |
|---|---|---|
| Who for | Bed slide, this SKU | Bed slide, pick the row for the truck |
| What it is | Cargo slide. Not drawers. Not a toolbox | Same product family |
| Payload | 1,500 lb | Up to 2,200 lb on rated models |
| Extension | 75% | 75% or 100% by model |
| System size | 63.4 × 48.7 × 5.2 in | Confirm the row |
| Tray | 59.3 × 45.3 × 3.9 in | Confirm the row |
| Weight | 128 lb | Confirm the row |
| Tie-downs | Four D-rings | Four D-rings standard |
| Not for | GMC CarbonPro. Fifth-wheel. Gooseneck. Bed-mounted spare | Same. 600 lb model is a different page |
| Not this pick | DECKED full-size drawers. AMP BedXtender. A crossover toolbox | The 600 lb model. Treating this 1,500 lb row as the family’s 2,200 lb rating |
Fitment
CargoGlide fits most trucks on DECKED’s claim. It does not fit a GMC CarbonPro bed. It does not fit a bed with a fifth-wheel, gooseneck, or bed-mounted spare sticking into the tray path. Match bed length to the SKU. DCG1500-6348 is the 63.4-inch-class, 1,500 lb, 75 percent row from the tech-specs page. A longer bed or a 100 percent tray is a different part number.
Shop by truck
Same Amazon listing as the pick above. Confirm the CargoGlide row for the truck. Drawers and a flip-out extender are not this page.
Chips are the locked Shop listing for DCG1500-6348 — same Amazon listing as the pick above. The 600 lb model is a different page.
- Bed slide, 1,500 lb, 75% — DECKED DCG1500-6348
- Heavier family ratings up to 2,200 lb — confirm the CargoGlide row on decked.com
- 600 lb model — different page. Do not use the 2,200 lb line there
- Drawers under a deck — DECKED drawer system, not this page
- Flip-out gate — bed extender, not this page
Skip these
A drawer system sold as a cargo slide. That lives on Best truck bed drawer system.
A toolbox or a bed extender sold as CargoGlide. Flip-out gate: Best truck bed extender.
GMC CarbonPro bed.
Fifth-wheel, gooseneck, or bed-mounted spare in the tray path.
A 600 lb CargoGlide sold with the family’s 2,200 lb line. DCG1500-6348 sold as if it were the 2,200 lb rating — it is 1,500 lb.
FAQ
What is the best truck cargo slide?
DECKED CargoGlide. The part on this page is DCG1500-6348 at 1,500 lb payload and 75 percent extension. The product family extends 75 percent or 100 percent and supports up to 2,200 lb on the models rated for that.
How much weight does DCG1500-6348 hold?
1,500 lb, on DECKED’s technical-specs page for that SKU. The family line “up to 2,200 lb” is for heavier models.
Is CargoGlide a drawer system?
No. Drawers sit under a deck. CargoGlide is a sliding tray in the bed. They can pair on a different DECKED fitment page. This page is the slide.
Will it fit a GMC CarbonPro bed?
No. DECKED says CargoGlide is not compatible with the GMC CarbonPro bed.
Will it work with a fifth-wheel or gooseneck?
No. DECKED says it is not compatible with a fifth-wheel, gooseneck, or bed-mounted spare.
Is the 600 lb CargoGlide the same as this one?
No. The 600 lb model is a different page. Its rating is not the family’s up to 2,200 lb line, and it is not DCG1500-6348.
Last updated September 14, 2026. Author: TruckDaily.